@!=1
!===== Parameter File created 10/31/2008=============================
! Parameter files are used with graphic displays to specify the tags a 
! display uses at runtime.  The parameter file is passed to the graphic 
! using the /P option of the Display command.
! Syntax:
!     #replacement=tagname
! Example:
!     #23=A_COLOR
! #23 in any expression in a graphic  would be replaced by the tag A_COLOR.
!============================================================

#57=[Logix]HMI_RecipeOnline.CounterAndScale.MECHCarLugsOp
#58=[Logix]HMI_RecipeOnline.CounterAndScale.MECHCarLugsCen
#59=[Logix]HMI_RecipeOnline.CounterAndScale.MECHCarLugsNonOp
#60=[Logix]HMI_RecipeOnline.CounterAndScale.MECHFlapGOpBot
#61=[Logix]HMI_RecipeOnline.CounterAndScale.MECHFlapGOpTop
#62=[Logix]HMI_RecipeOnline.CounterAndScale.MECHLongBrush
#63=[Logix]HMI_RecipeOnline.CounterAndScale.MECHShortBrush
#85=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsOp
#86=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsCen
#87=[Logix]HMI_RecipeOffline.CounterAndScale.MECHCarLugsNonOp
#88=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFlapGOpBot
#89=[Logix]HMI_RecipeOffline.CounterAndScale.MECHFlapGOpTop
#90=[Logix]HMI_RecipeOffline.CounterAndScale.MECHLongBrush
#91=[Logix]HMI_RecipeOffline.CounterAndScale.MECHShortBrush
#1=HMI\Labels\CounterScale1
#7=HMI\Labels\CounterScale2
#13=HMI\Labels\CounterScale3
#19=HMI\Labels\CounterScale4
#25=HMI\Labels\CounterScale5
#31=HMI\Labels\CounterScale6
#37=HMI\Labels\CounterScale7